Expert Answers about Trailer Dolly
- Replacement Fenders For a Tow Dolly With 14" Wheels and Tires
- While the CE Smith Single Axle Trailer Fender # CE17920 may be able to fit your tow dolly, it will be best to try and find the fender that is specific to your tow dolly. Tow dolly fenders will have lights built into the fenders as well as inner fender wells that specifically bolt to that manufacturers tow dolly.
We do have tow dolly replacement fenders such as the Driver # RM-922004 and Passenger # RM-922005 for the Roadmaster 3477 Tow Dolly # RM-2050-1.
Or for a 2018 and newer Demco...
view full answer... - Replacement Battery Charger Needed for Trailer Valet Remote Control Dolly
- There are 3 different battery chargers for the Trailer Valet remote controlled dollies and the correct one just depends on the weight rating of your dolly:
3,500 lbs - # TV77FR
5,500 lbs - # TV87FR
9,000 lbs - # TV27FR
Once you know the weight rating of your Trailer Dolly just choose the corresponding charger and you're all set!
view full answer... - Axle Diameter and Tire Size of Rack 'Em # RA20 Trailer Dolly
- We do not offer a larger tire for the Rack 'Em # RA20TIRE trailer dolly. The axle diameter is 11/16 of an inch, and the rim is 6 inches in diameter. The tire size is 4.00 x 6.
view full answer... - Replacement Spare Wheel and Tire for Demco Kar Kaddy 3 Tow Dolly
- The correct spare wheel and tire for the Demco Kar Kaddy 3 Tow Dolly with Disc Brakes part # DM9713046 is the ST205/75R14 Radial Trailer Tire w/ 14" White Mod Wheel for Demco Kar Kaddy Tow Dolly part # DM5965. The Karrier ST205/75R14 Radial Trailer Tire w/ 14" White Wheel part # AM32161 won't work as the wheels need to have a specific offset for the Demco Kar Kaddy 3 and the Karrier option does not come with this offset. Unfortunately, the wheels for the Demco Kar Kaddy 3 are rather unique...
view full answer... - Replacement Snapper Pin for Trailer Valet TVXL2 Trailer Dolly
- We don't have the exact snapper pin that's included with the Trailer Valet XL trailer dolly, as it's not an item they sell separately, but we offer one with the same diameter pin and usable span, which is part # 38-212TR. The pin is 3/8 inch in diameter and a 2-1/2 inch usable span, just like the pin that was originally included with your trailer dolly.
view full answer... - What Prevents Cotter Pins of Rack'em Trailer Dolly RA20 From Backing Out
- If the cotter pins that hold the wheels on the Rack'em Trailer Dolly # RA20 are sliding out that means you don't have the pin installed properly. Push the pin through the hole and then bend the ends of the pin that stick through the hole out so that the pin cannot slide out. With the pin bent like this it would prevent it from falling out.
view full answer... - Replacement Tire and Wheel Kit for Master Tow Dolly Model 77T
- According to my research your Master Tow 77T tow dolly has 205/75-14 size tires with a 5-bolt pattern so I recommend this combo from Kenda:
- Kenda Karrier ST205/75R14 Radial Trailer Tire with 14" Black Mod Wheel # AM32131
This kit has a load range of C (1,925 lbs at 60 psi) and a max speed rating of 81 mph so it will be a great replacement for your tow dolly!
view full answer... - Replacement Brake Shoes for Roadmaster Tow Dolly
- The Roadmaster Tow Dolly # RM-2050-1 uses the Dexter Nev-R-Adjust Electric Trailer Brake Assembly # K23-479-00 and # K23-478-00. For the replacement brake shoes, you will want the right hand side # K71-699-00 and left hand side # K71-698-00.
view full answer... - Tow Dolly Replacement Lights
- For your old car dolly, you may be interested in the Replacement Driver's Side Fender for Roadmaster RM3477 Tow Dolly with Electric Brakes - Metal # RM-922004 and # RM-922005.
For similar lights you can use the Peterson Square Trailer Tail Light, 7-Function, Left Hand
# 432400 and # 432200.
For light from the sides instead of reflectors, you can use the Over 80" Wide, Square LED Trailer Tail Light, 7-Function, 18 Diode, Right Hand # STL2RB and left hand # STL3RB.
view full answer... - Replacement Wheels and Tires for Old Demco Tow Dolly with 14 Inch Wheels
- I spoke to my contact at Demco and they said that if your Demco Tow Dolly came with 14" wheels then the Replacement Wheel for Demco Kar Kaddy 3 Tow Dolly part # DM09296 is correct for you. The older ones came in a tan color with triangular shaped holes but this will still work for you as it has the same 5 on 144 mm bolt pattern and +42 mm offset that you need. If you need to replace your tires as well then I recommend using the Karrier ST205/75R14 Radial Trailer Tire part # AM10234 which...
view full answer... - Replacement Tires For a Car Dolly With ST205/75D14 Tires
- If you want to stay with a bias tire we have the Kenda ST205/75D14 # AM1ST52 in a load range C. You will need to check your specific tow dolly to ensure this is the correct load rating for the trailer. I do see most tow dolly's will use a load range C tire.
Since radial tires perform better on road than bias tires you will benefit from making the change. We have the Karrier ST205/75R14 in a load range C # AM10234 or D # AM10235.
view full answer... - Replacement Fender and Light Mount for Tow Dolly
- The Fulton Single Axle Trailer Fender with Top Step - Black Plastic - 14" Wheels - Qty 1# F008554 is a great fender to replace what has broken on your current tow dolly. You can use the Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF775X21W - Qty. 2 # PF775-BKT-2 for additional support. The bracket # BK70BB is not wide enough to mount to the fender without altering the mount so I recommend cutting the hole in the fender and using grommet # a70gb for your...
view full answer... - Replacement Hub / Disc Brake Kit For EZE-TOW Tow Dolly With 5 On 4-1/2
- I did some research and found that the Kodiak Disc Brakes - 2 Wheel Set - 8" Rotor and Hub Spacer 3,500 lbs # K2HR35D-8 will be your best bet. This is compatible with your 5 on 4-1/2" pattern and your 10" wheels. The bearings and seals are not included. For the seal go with Grease Seal # RG06-050, for the inner bearing go with # L68149, for the outer bearing you will need # L44649.
view full answer... - Is Trailer Valet RVR3 Remote Trailer Dolly TVRVR3-BB225 New or Refurbished
- We do not sell refurbished versions of the Trailer Valet RVR3 Remote-Controlled Trailer Dolly w/ Hitch Ball Mount # TVRVR3-BB225 we only carry the brand new versions. We haven't seen enough failure from these to notice a trend of any of the components failing.
view full answer... - Replacement Wheels and Tires For Demco Kar Kaddy SS Tow Dolly
- I recommend staying with one of the Demco specific wheels we carry. We have a Chrome Wheel # DM11574 that are the exact fit for your Demco Kar Kaddy SS Tow Dolly # DM9713045.
We do carry the ST205/75R14 Radial Trailer Tire w/ 14" Chrome Wheel for Demco Kar Kaddy SS Tow Dolly # DM5968 that is already mounted. Or you can get the Karrier ST205/75R14 Radial Trailer Tire # AM10234 for mounting to either of the wheels listed above.
As the manufacturer does not list using a wheel with a +44mm...
view full answer... - Replacement 4.80/4.00-8 Kenda Tires for Boat Dolly
- 4.80/4.00-8 tires like the ones you have fit 8" x 3-3/4" rims so any replacement tire that is the same size should fit your wheel. You should be able to use the Kenda K371 Bias Trailer Tire - 4.80/4.00-8 # AM10004. The only concern would be clearance depending on the design since this has some larger measurements, but more than likely that will not be an issue if it is like your typical dolly.
This tire has an outer diameter of 16.1" when inflated and a section width of 4.7". These also...
view full answer... - Replacement Bolt on Hubs for Car Hauler
- I may be able to piece together a solution for you on this, but as far as replacing your original hubs like for like you would need to know the dimensions of the spindle to determine if there is a replacement hub that works on those. You could use the Roadmaster Replacement Spindle Weldment for Roadmaster Tow Dollies # RM-2000-32 as replacement spindles on the trailer and then use the # RM-2000-16 (drivers side) and # RM-2000-17 (passenger side) to replace the hubs.
The downside to this...
view full answer... - Replacement Trailer Fenders for Car Tow Dolly Trailer with 14 Inch Wheels
- No worries. I have seen fenders in much worse shape. It looks like the best option is going to be the fenders that you have referenced # CE17900G. I know that this fender does not have mounting holes. But that is because they are a universal fit item and you will need to provide your own hardware for mounting. We do have some mounting brackets you can use, # CE26098G-2.
I have also included a link to all of the fenders that we carry that fit 14 inch wheels. Fenders, unless otherwise noted,...
view full answer... - Replacing Existing 7-way Trailer Connector on Motorhome on Ford E450 Chassis
- Depending on the 7-way connector you presently have, we might have a very easy solution for you.
Take a look at your existing 7-way, and see if it's possible to unplug the factory harness from the back of the connector. There will be a gray locking tab that needs to be slid toward the front of the vehicle before the connector can be unplugged. If it's possible to unplug the harness, the Tekonsha # 74682 would be a perfect plug and play replacement.
If you cannot unplug the connector from...
view full answer... - Which 2 Inch Hitch Ball For Use with the Trailer Valet XL
- There is a special 2" hitch ball for the Trailer Valet XL # TVXL25, which is available with the Replacement 2" Hitch Ball for Trailer Valet XL Trailer Dolly - 1,000 lbs # TVHB2. This can be used if your Trailer Valet came with the 2-5/16" ball.
view full answer...
Go To Results